Don’t you just hate it when you’ve to choose between downloading important files and watching your favorite movie, all because your Netgear N600 router isn’t connecting to the internet? Well, I can understand what you’re going through as I went through something similar few months back. So, don’t worry, this article has solely been written to resolve the issue that you’re facing. 

Here, I will provide you with the topmost troubleshooting steps that will help you in getting rid of the ‘router not connecting to internet’ issue. So, with no further dicussion, let’s get started, shall we? 

Resolved: Netgear N600 Router Not Connecting to Internet 

  1. Switch to a Different Connection Mode

One of the biggest reasons why your Netgear N600 router isn’t connecting to the internet is because of an improper connection between your WiFi devices. In simple words, there is a possibility that the connection between your router and modem is poor. 

To resolve this issue, ensure that your connect your devices properly while performing Netgear N600 setup. If you connected your device wirelessly earlier, then it is recommended that you connect them using an Ethernet cable. 

  1. Contact Your Internet Service Provider

If changing the connection mode didn’t resolve the issue, then get in touch with your Internet Service Provider (ISP) as soon as possible.

For those of you who are wondering why, then know that you can’t be certain that your router isn’t connecting to the internet because of a mistake that you committed. Chances are that the issue is from the end of your Internet Service Provider.

Also Read : How to connect bluetooth headphones to xbox one

  1. Power Cycle the Netgear N600 Router

If your Internet Service Provider wasn’t at fault, then it looks like you need to give another troubleshooting tip a try. And that is, power-cycling your Netgear WiFi router. 

Sometimes, your N600 router might not be connecting to the internet because of a random technical glitch. And to fix this issue, a simple restart is enough. Mentioned below are the instructions that you need to follow in order to power-cycle your router:

  • Disconnect all the extra devices connected to your Netgear router.
  • Then, unplug your WiFi device from the wall outlet. 
  • Give your device a couple of minutes to rest. 
  • Next, plug the power cable back into the socket and switch on the Power button. 
  • Do not connect other devices to your router before the LED light turns solid green. 

Now, check whether your router is connecting to the internet by accessing the www.routerlogin.net administrative page. If not, then scroll down, and continue reading. 

  1. Update the Firmware of Your Device

An outdated firmware is another reason why your Netgear N600 router isn’t connecting to the internet. Thus, make sure that you update the firmware of your home router. In case you are wondering how, then here are the guidelines that you need to follow:

  • Switch on your laptap or computer. Whatever you use generally. 
  • Then, go to the Netgear routerlogin administrative page.
  • Once done, navigate to the Settings option located at the top left corner. 
  • Next, choose the model name of your Netgear N600 WiFi router.
  • Click on the Firmware Update option, download the file.
  • As soon as the file gets downloaded, upload it. 

Now, give your Netgear N600 router some time to get updated. 

  1. Perform Factory Default Reset

If updating the firmware of your device wasn’t of any help either, then it is recommended that you restore your WiFi device to its factory default settings. 

Here are the instructions to reset your Netgear N600 WiFi router:

  • Locate the small Reset button on your home router.
  • When found, take an oil pin, and carefully press it.
  • Hold the button for about 10 seconds and then release it. 

Note: You can also reset your device by logging into your router by using 192.168.1.1.

Once your device gets restored to its factory default settings, perform the setup process from scratch and connect your router to the internet.